Jiukoum Shrine location and walkthrough in Zelda: TOTK

Jiukoum Shrine The location of the. Tears of the Kingdom – The Legend of Zelda’s Faron region in the Popla Foothills.

You can find all the information you need in our guide. Jiukoum Shrine location and walk you through how to solve the “Built for Rails” puzzle so you can collect the shrine’s treasure chest and The Light of Blessing.

When you’re done, our shrine locations page or interactive Hyrule map can direct you toward something else to do.

Jiukoum Shrine Location

You can also find out more about the following: Jiukoum Shrine It is tucked away in the Popla Foothills of Faron in a rock area. You’ll find it at these coordinates: (0867, -2280, 0141).

Jiukoum Shrine ‘Built for Rails’ walkthrough

The “Built for Rails” The trial is a good way to test the system. Jiukoum Shrine is about movement — specifically about movement on rails. Using the Ultrahand ability, you’ll have to use platforms to navigate a complex system of rails in the shrine.

1. You’ll see the first rails when you walk into the first room. Two platforms are located on the right side. These platforms should be attached side by side. Make sure they are perfectly aligned. You’ll know you did this right when a rail appears on top.

Image: Nintendo EPD/Nintendo via Polygon

2. Position your platform between two walls, so that it fits well. Ride the rails and hop on to reach the next area.

3. Next, you’ll be able to access the rails. But first, find the chest hidden in the nook of the left-hand side of the next room. You’ve got five platforms total, including the two you combined to get into this room. UltrahandFour of these (two on bottom and two for the ramp), combined, will create the ramp to reach the treasure As such:

Image: Nintendo EPD/Nintendo via Polygon

4. You can use the glider, climb up the ramp and then jump down to the chest. Sticky Elixir. Head back down into the main room — you may have to remove the ramp to do so.

5. Now, you’ll create a platform to ride the rails. All things considered Tears of Kingdom, there are likely a few ways to do this, but here’s how we pulled it off. Grab two small platforms and the long platform that’s already on the rails. They can be ultrahandled together in a T-shape, one platform on the bottom.

Image: Nintendo EPD/Nintendo via Polygon

6. It’s the vertical piece between the rails that’s the most important; you need it to keep things stable, or else it’ll be too unwieldy to ride. Then, hop aboard and continue along the rails until you reach the next station.

7. Head up the stairs, where you’ll see Four separate platformsThe following are some examples of how to get started: Three fans. (Platforms to the left of the fans.) Here, the rail system is more complicated and partly on an uphill slope. Put the long platform onto the rails. Fuse the two ends of the small platforms together so they will fit into the gap between rails. Then, fuse one in the center so that the platform will be supported as it changes from two to one rail.

8. Turn the newly constructed platform around so the vertical platforms fit in the small gaps between the rails — this ensures it stays on the rails. Two fans can be placed on these vertical slabs. Place the third fan in the middle of the top long slab, with another short slab underneath it.

Image: Nintendo EPD/Nintendo via Polygon

9. Jump on the fan and start all of them by hitting the top. Keep your hands on the rails! It is important to keep the middle part steady, as the rails will change in the second half of the ride.

10. The shrine is complete when you examine the green symbol at the end. The Light of Blessing.